Are you the publisher? Claim or contact us about this channel

Embed this content in your HTML


Report adult content:

click to rate:

Account: (login)

More Channels


Channel Catalog

Channel Description:

MHH AUTO - https://mhhauto.com

older | 1 | .... | 1707 | 1708 | (Page 1709) | 1710 | 1711 | .... | 4895 | newer

    0 0


    i have two problems with auxiliary battery

    i have a w204 2013 with a auxiliary battery problem,the battery is not charging and have replaced the relay at the battery but it still wont charge but if i put a positive wire on the wire coming from the front sam which is the one that will activate the relay,the battery will charge. this is the first problem.

    the second problem

    when i hook up the car to xentry,and check the battery power is 12.8volts but the internal resistance is 1160,so i decided to change the battery but still same problem.have tried three battery so far and all gave me same result.i removed the battery and put in another car and they where all fine.i got another front sam and program it to the car and i still have same problem.

    pls any advise and assistance will be appreciated.

    0 0
  • 07/26/17--13:25: Panamera II 2017 diag tool
  • What tool is capable of diagnosing new Porsche Panamera (971, 2017 model) ? https://en.wikipedia.org/wiki/Porsche_Pa...

    PIWIS II from 2016/10 does not seem to cover it. I heard about PIWIS III, is it some Chinese fake or a real tool?


    0 0

    Hi to all
    I ve need this backup or just flash
    Bdm backup croma 2.4 200hp 0281012150 sw 1037391911
    Best regards

    0 0
  • 07/26/17--13:37: Ford Edge 2011 Change BCM
  • hello friends i need help about ford edge 2011 i change used bcm how i can do now programing car have smart key system when i put other bcm now switch not come on please guide me how i can do programing i try to program smart key get successful message but still switch not open

    i have ford vcm 1 please guide me what is the best way to solve this problem thanks

    0 0
  • 07/26/17--13:46: Pin code
  • Halo please I need pin code for Kia sportage vin
    Knapc813df7779151 thank you in advance

    0 0
  • 07/26/17--14:06: BMW F01 crash reset
  • Hi I need clear crash data from airbag module BMW F01 ecu nr :6679199756-01 and ACSM 607838400T, file attached, processor MAC7241.

    File Type: .rar
    Downloaded: 2 times
    Size: 161.93 KB

    0 0
  • 07/26/17--14:40: Mappack for sell?
  • Hello did sameone have mappakc for sell for exp.stage 1

    File Type: .png
    Downloaded: 3 times
    Size: 122.14 KB

    0 0

    Hi All Mhhauto Members !
    I need reflash my Audi A6 4F Gateway but i can't find the file 4L0910468A_0071 SGO. Can someone help me?

    0 0
  • 07/26/17--14:46: Mercedes C200 CDI Burned ECU
  • Hello friends, well as the subject the ECU on this car was burned due to an a overvoltage. That ECU was replaced with a used one with the same software and hardware programming the Flash and eeprom data from the old ECU to the donnor and now the car starts.
    My problem is when i read the the ECU with MB star diagnosis some errors are present in the eeprom and i suspect is due to the problem of overvoltage.
    On swith on the ingnition the car enter in a protection mode, just 300 rpm, on swith off and start again nothing happens but after a minute start again.
    My request is anyone could share some eeprom file of a Mercedes C200 CDI 2001 engine OM611 AT trasmission ECU Bosch 0218010607.

    Many thanks in advance

    0 0

    Hi mates
    Is there any idle speed adjustment funtion on Toyota Techstream?

    0 0

    easy diag plus owners .. did you manage to activate full version using license from any downloaded free brand ?

    0 0

    Can somebody help with code for radio RNS 510:

    1T0 035 680 B


    0 0

    Hi guys,

    can i please have immo off and egr off? Please note i do not have star to adapt ecu to car.


    w210 320cdi eeprom.rar
    File Type: .rar
    Downloaded: 0 times
    Size: 654 bytes

    0 0

    Hello for all

    I need change mileage to "100" KM.

    MCU = MC9S12XHZ256

    Thanks a lot

    File Type: .rar
    Downloaded: 0 times
    Size: 997 bytes

    0 0

    No Cam signal will get cam signal after cranking 45 secons but no start

    0 0

    [Image: attachment.php?aid=197917]
    more info comming soon

    File Type: .txt
    Downloaded: 2 times
    Size: 70 bytes

    0 0
  • 07/26/17--17:19: 036906034DG immo off
  • my customer has left the ignition on and battery gone flat, the immo light is flashing and there is 2 ECUS in the footwell.

    Could the immo be removed on this ecu, have attached the orig 95080ST dump.

    many thanks

    File Type: .rar
    Downloaded: 0 times
    Size: 324 bytes

    0 0
  • 07/26/17--18:04: kess invalid protocol pcr2.1
  • Hi i have kess clone sw2.08 fw 4.036 it has been great until i try to do pcr 2.1 with tricore module, i get invalid protocol error. i have done a lot of reading and people suggest new sd card.

    I have tried copying old sd card files onto new sd card but then all protocols are grayed out, if i put old sd card back in they are ok again.

    What am i doing wrong, please help.

    0 0

    need help please with cat off in Peugeot 206

    File Type: .rar
    Downloaded: 0 times
    Size: 112.17 KB

    0 0
  • 07/26/17--18:58: Launch Autopsy or Dissection
  • Launch autopsy or dissection collected from some forums


    use google translator



older | 1 | .... | 1707 | 1708 | (Page 1709) | 1710 | 1711 | .... | 4895 | newer