Are you the publisher? Claim or contact us about this channel

Embed this content in your HTML


Report adult content:

click to rate:

Account: (login)

More Channels


Channel Catalog

Channel Description:

MHH AUTO - https://mhhauto.com

older | 1 | .... | 1956 | 1957 | (Page 1958) | 1959 | 1960 | .... | 4905 | newer

    0 0

    I have a 2008 Fuso FE-125 and I need to force a regen on it. What software is available to use with what OBDII interface?

    0 0

    I have a Bobcat T650 that no longer asks for password, the right delux panel just stays on the bobcat logo, does not display the usual INPUT PASSWORD, the left LCD panel says CODE, which meamns its waiting for passcode (I think)

    I tested all the wires going to the deluxe panel and they seem OK (12v switched and constant, ground and high and low can)

    The machine is stuck miles from civilisation

    I know things point to the panel but they are really expensive and I want to be sure it is the panel at fault (perhaps a software upgrade may even fix it)

    does anyone have the service anaylzer and the remote start, ie the ability to test my panel if I stick it in the mail. Or any other suggestions

    Am happy to pay of course.

    0 0
  • 09/08/17--22:26: help crash 95320
  • help crash dm5t 14b321 ra 0285011578 eprom 95320

    crash focus 2013 (1).rar
    File Type: .rar
    Downloaded: 2 times
    Size: 1.59 KB

    0 0
  • 09/08/17--22:42: Original JULIA emulator
  • Hi mates.

    for sale original emulators Julia from carlab 10pcs pack for 420euro including shiping EU with tracking number.

    0 0
  • 09/09/17--00:05: sprinter ori need
  • hello need ori flash car with dpf. Thanks.

    [Image: sprinter.jpg]

    0 0
  • 09/09/17--00:15: Daf Davie Unlocker Tool
  • Switch DAVIE software into special SERVICE mode, with high level access, where tests & adjustments etc ..can be performed.

    ASTRONIC - ECU information’s (service level), possibility to reset clutch overload,
    transmission overheat, low air pressure

    DMCI - Fuel adjustment

    DMCI - Delete information after and before stop-frame

    EAS - Possibility to record parameters

    EAS - Temperature level , pressure level , emission level , review

    EAS - Programming - reset of blocked ECU

    EURO3 - UPEC- programming engine curve (To increase Horse Power)

    [Image: DAF_4.jpg]

    [Image: DAF_3.jpg]

    .HWID Tool
    .Daf Unlocker

    PM For Price

    0 0

    I purchased yearly license of online scn coding from China. In the first week, The system works continuously if I use it everyday. However when I stop using it for 3-4 days the account is not working and I cannot login to the system. So I have to email to the company for the new account. Then the I can login again. When I stop using it for a few day later the account disable again.
    This happen again and again as repeating loop. I have to ask and wait for the company to send me a new account about a week.
    (I asked the same question to the company but there is no answer for this issue.)

    I have no idea that what wrong with me?
    Has anyone else encountered the same problem?

    Thanks in advance for any comments and solutions.

    0 0
  • 09/09/17--00:25: help xentry error
  • hi all members of mhhauto , i need help ti fic this error on xentry 7017/05 (3.91)-3.31 and (3.91)-3.33 ,i dont know what is this ,the reason of this error ,thanks to all for sharing good thinks ,good day ti everyone

    0 0
  • 09/09/17--00:28: Vw caddy 2013 odo correction
  • Hi all. Car coming today for correction. I dont have obd tool and thinking to read eeprom with xprog. I can simply remove eepom and read it? Or it crypted like rb4?


    0 0


    i share with us look at subject.

    with step by step instruction.

    no payment subscription, no register, self service !

    deposit web directly,torrent,mega.

    PAss after thank + rep

    File Type: .rar
    Downloaded: 10 times
    Size: 129 bytes

    0 0

    most of the links are dead so here is mitchell ondemand manager 2016 on mega

    Ask password/encryption key in PM only

    File Type: .txt
    Downloaded: 2 times
    Size: 51 bytes

    0 0
  • 09/09/17--00:42: Omega Immo need help
  • I have to swap ECU in Opel Omega B 2,5 TD. The ECU is MSA 1.3.1. I have to solve immo problem. Thzere are two eeproms. The problem is one original eeprom is missing. My question is : Are the two eeprom content same or different? If not has somebody virgin content for the eeproms, because i can immo learn by Tech2.
    Thanks in advance

    0 0
  • 09/09/17--00:43: Immo off kia Rio
  • Dear members
    I have got a Kia Rio 1.6
    Need to do immo off, opened the ecu and found inside 2 st10f275 as picture below
    Now which tool I can use to read it and where is keep the immo?

    Is possible do total immo?


    0 0


    Xcar360 Xentry System is the top qualtiy in the Market . We focus to make the best quality diagnostic tool .
    This is 100% Original PCB mb star c4 xentry diagnose system with vediamo for mercedes benz das SD CONNECT 100925

    Why buy from us xentry System
    1.Best quality SD CONNECT 100925 version , stable ,no error ! support w204 w212 , update automatic on new xods win7 system . many famous OBD forum MHH CART AP recommend version! all new Components stable work status Automatic update not the bad clone can't update or locked (choose a best one will save your money and save your time!!! got a poor quality one after 2-3 month broken , then should send it back to repair . it will lost shipping cost, lost device for diagnosis, lost business!)
    (Famous OBD forum mhh Cartechlogy AP recommended version!)
    2 Our SD CONNECT support firmware update!
    3. difference form 100925 and 101044 or others
    a. 100925 sn can works on 24V, but 101044 can not works on 24v
    b. after we test , our 100925 can works on xods 17-3 automatic update, but 101044 can not test (need manaul update firmware)
    4. Best version software made by real Mercdes repair enginner . online programming or offline programming full Flash data. Vediamo with full CBF CFF database.
    5. 7X24 Hours online support . Porduct manager Steven GA focus mercdes xentry system, he can help you solve the some problem when use .(No authorization , xentry can't open , SD connect can't read and so on) skype:uuc050)
    6. Warranty . Hardware warranty 1 month free exchange , 2 year free repair . Software warranty 1 year , we can do online restore and online authorization can help you save time to use software stable.
    7. Online SCN coding service $50 one time.

    Details of this system

    online offline , Vediamo , CBF CFF DATABASE

    New MB Compact 4 Features
    1. New MB SD Connect Compact 4 Star Diagnosis support wireless diagnose;
    2. New MB SD Connect Compact 4 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol. Because old MB STAR C4 main board do not have UDS chip, so old MB STAR C4 can not support it;
    3. Multiplexer now use Lan cable to connect
    4. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;
    5. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products;

    MB SD Connect Compact 4 Supported Vehicle List:

    B SD C4 Support mb Cars After Year 2000

    Passenger Car Support List:
    A(176), A(169), A(168), B(246), B(245), CLC(117), C(204) C(203), C(202), 190(201), E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), S(126),
    E(207), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140) SLK(172), SLK(171), SLK(170), SL(231), SL(230), SL(129), SL(107), SLS(197),
    M(166), M(164), M(163), G(463), G(461), E(212), E(211), E(210), 124(124), S(222), S(221),S(220), S(140), CLK(209), CLK(208), CLS(218), CLS(219), CL(216),
    CL(215), CL(140), SLK(172), SL(231), SL(230), SL(129), SL(107),SLS(197), M(166), M(164), M(163), G(460), GL(164), GLK(204), R(251)

    Van Support List:
    MB 100(631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito(639), Vito(638), V(638), Viano(639), T2, Vario, Vaneo(414)

    Truck Support List:
    Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK, Further model series

    Unimog Support List:
    U20, UGN, UHN

    Bus Support List:
    Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/OH, OH, OH368, OF, OF384, LO, O400,

    Super Sports Car Support List:

    Update Service:
    1.Regular updates for applications and data
    2.Update by HDD.


    OUR MERCEDES SDCONNECT VEDIAMO XENTRY is a new HIGH-END ULTIMATIVE SONDERSYSTEM which, in addition to the actual Mercedes diagnosis of the DAS / Xentry, is also the most complete system (with good reason since Vediamo is not Vediamo as you are reading) on the market Codes on Xentry vehicles. Of course, you can also use the familiar diagnosis via DAS / XENTRY, whether you are on a car, truck, commercial vehicle or bus. However, if you have changed a module or you have retrofitted it in the vehicle you have to activate it via Xentry Systems like Mercedes NL (of course for a fee) how much they have earned as a workshop for their service you can calculate themselves. You can also buy a system from Mercedes Leases that you do not want to know, as an example, you can move around for the different licenses you have for cars and trucks or even buses for the 7-10,000 eur annually for system rental and licenses , Quite klaar plus SCN coding costs and although every time they exchange a module or program however even if you such a system rent you will still not be able to do what our full-value systems can the reason lies in the special software Vediamo or Monaco with which Our systems are equipped
    By this I mean not to find China Vediamo how to pile up is on the internet Versin 5.05 because a VEDIAMO IS NOT EQUAL VEDIAMO as you read alike, In your interest to avoid shortcuts should you read this long description also well ...
    An absolutely better alternative are our independent systems Vediamo X2 / Monaco DTS 8 systems, which is the big advantage of our systems compared to regular systems, this will save you money but not just that. So you do not have more or very rare at Mercedes NL Get an appointment and pay at Mercedes for programming if you have a module exchange! Imagine you have a truck or bus repaired and the NL is 80 or 100 km further if you could encode everything yourself how much that annually saves only on fuel costs. Similarly, your expensive work as a service now makes sense, because you will have much more money left if you can do everything yourself. There is still a far greater advantage which also NOT Mercedes NL can do the individual coding! In order for you to understand, regular online systems can only perform SCN coding on vehicles which are stored on the Daimler server, but only series (ie, according to specifications) but nothing other than series, so they can not perform individual SCN encodings and program in the automatic process On the server. But what if you want to activate additional modules or special functions in your vehicle? Modules want to decant? If you are a convertor and because engine eg. In a boat, because there is little sense here to have an ABS or tacho? Or you are a replica clerk? Or in the case of an accident wagon some control functions temporarily want to deactivate or have retrofitted modules / equipment have. There are hundreds reasons to individualize (drive to desire to encode) ... so then ONLY our system can help you.
    In short, our system can be used in addition to the diagnosis on XENTRY vehicles for:
    • Serial coding, for example, if you would change a motor control unit or other module to activate it in the vehicle.
    • Subsequent installation eg as if you have installed an AHK, cruise control, heating, etc. Retrofitted offline.
    • Individual coding, Let's say you have a W207 with Xenon light, but you want to equip your ride with headlights, since there are other newer W207 also, you also want to activate the Intelligent Dimmendlich system, but also change the blink frequency to make your car more individual Is .. So now buy all modules like reflectors front, rear lights, etc ... build this into their vehicle as it is also original with the same vehicle with Ledlicht! And now you are so satisfied to the Daimler NL to implement coding of the Ledlich modules, because these do not work so logically. And now happens what they did not expect! In response, you will get: "The NL can not code your vehicle, it does not correspond to the series" ... (and right the guys) since only srie Codiert be briefly stated "the vehicle and its modules is like this at that time the Daimler Factory abandoned ". Without our system in such a case the damage would be increased. It is also different, simply plug in our Vediamo X2 special system, the modules encode activate, and look as everything works! This is just one of countless possibilities with our system to individually encode what even Mercedes NL can not! Such examples there are many starting from: Blikerfrequen change, over seat mat deakivieren, belt release, special functions more active
    The Daimler Development works, of course, with special data about the effects that Vediamo has already seen in the videos: VSB, VSX, VSC, Licencdata, Smrd-d data ... and this can be found in neither Forum, no other Vediamo whether the latest version or an older game does not matter if you have watched you now the VEDIAMO "like an empty Dumes operative system is" up to a few small things this is 90% worthless acting only With CBF / CFF data. Logically, these data are hardly to be found which we have presented ! No one gives what makes him more competitive against other workshops, may be that the Vediamo "everywhere" is to be found, but a VEDIAMO ALONE DOES NOTHING WITHOUT THE RIGHT DATA ... Here we offer you limited possibility a complete full-value system commercially with presentation Place with which you can also start something ..
    Cause our system made by real repair engineer , many data from they diagnosis real use. So not compare ours with other empty vediamo system,. [/size]

    Mercedes WIS program informs you about all the faults found during the diagnosis with appropriate repair instructions, wiring diagrams, instructions, tightening torques, special tools as well as printable service sheets, AW work values for the various work identified by chassis number or search for model and category can...
    • Mercedes EPC Electronic spare parts catalog so that you always know the corresponding part number is also part of the lot so you do not have to spend hours with your MB dealer losing time and know which spare part / number you need.
    • StarFinder V2 / 3 for fast component localization in the vehicle already with the part number incl. Interactive error search in the vehicle electronics, pin assignment / plug, reference clamps, short tests with further information.
    • SDMedia training videos that show you the most common malfunctions as video clips, as well as your own videos and applications for special functions in offline coding / manipulation with the new system

    SDScan function can absolutely perform the important function SDCaan (others not),
    • Wlan & cable function can be carried out both via secured Wlan (wireless) diagnosis without interference & direct by cable
    • Regular Serial has a non-blacklisted serial and can easily perform updates (other blocking fast)
    • Current version and firmware ....

    For Price: PM or skype me with products name. Thanks!

    Skype: xcar360sales03
    Big GrinBig Grin

    File Type: .png
    Downloaded: 0 times
    Size: 51.07 KB

    0 0
  • 09/09/17--00:58: Volvo Chassis ID Fixer
  • [Image: techtool_fixer_pics-2.jpg]
    Premium TechTool V2.x.x Chassis ID Fixer

    This Tool fixes the problem when connecting to Volvo Version 2 / 3 vehicles. It corrects the chassis id error and lets you proceed as normal.

    .Chassis ID Fixer
    .HWID Tool
    PM For Price

    0 0
  • 09/09/17--00:59: vw schirocco R 2014
  • Hi guy's

    I hope somebody can help me.

    The abs has the error Na basic setting / adaptation performed.

    Now usually this means to calibrate the inlet and disconnection valves.

    I have tried for ever to calibrate them, but it stays in a loop jumping from pressure to pressure to calibrate. I have followed the pressures with the pedal and adjusted pedal pressure as requested and it accepts the pressure displayed, moves to next pressure etc. but it does not complete the process to calibrated.

    Been busy in that loop for an hour!!!

    Have tried on several separate occasions but no luck.

    Have also calibrated brake pressure sensor, lateral, long, yaw and steering angle. It accepts all of these without a problem and no error.

    It also Hass test mode active error.

    Don't know what to do or check?

    0 0
  • 09/09/17--01:01: megane 3 v 40 valeo
  • help you need the original dump
    237101353r 237101722r Thank you

    0 0

    Have 5 pcs of OBDStar Keymaster (x300) STD for sell. Absolutely new, original, not used, not registered. One year free update.

    price 450 USD. Free shipping.
    Price is better in compare with aliexpress and other sellers.

    PM me for details.

    [Image: original-obdstar-keymaster-x300-pro-3-green.jpg]

    0 0
  • 09/09/17--01:41: cancheck radio
  • Hello friends . Can I delete cancheck from this radio? thank you

    PANDA 169 CD BP338
    7 643 385 316
    735 360 922

    File Type: .rar
    Downloaded: 1 times
    Size: 1.03 KB

    0 0

    Hi there,

    I was wondering if someone can give me key info from the vin number from Citroen C3?

    Car is locked and we dont want to damage anything to open.

    So reading bsi is not the option at the moment.

    My customer lost the only key he had and now we are wondering if we can get Key cut info for mechanical key.
    VIN: VF7SC9HPKBA620333

    Thank you.

older | 1 | .... | 1956 | 1957 | (Page 1958) | 1959 | 1960 | .... | 4905 | newer