Quantcast
Are you the publisher? Claim or contact us about this channel


Embed this content in your HTML

Search

Report adult content:

click to rate:

Account: (login)

More Channels


Showcase


Channel Catalog



Channel Description:

MHH AUTO - https://mhhauto.com

older | 1 | .... | 4839 | 4840 | (Page 4841) | 4842 | 4843 | .... | 5081 | newer

    0 0
  • 11/24/19--07:09: DAF developer tool v1.01
  • [Image: gmaha0c5qqoa_t.jpg]
    [Image: jelo2kn28taj_t.jpg]
    Funkcje narzędzi programistycznego DAF / PACCAR DAVIE:
    • Hasła do programowania rozbił jednostki ASF

    • Hasła do programowania rozbiły jednostki DMCI

    • Hasła do programowania wykorzystują awarię urządzeń ECSDC3

    • Hasła do programowania wykorzystują awarię urządzeń ECSDC4

    • Hasła do programowania wykorzystują awarię urządzeń ECSDC5

    • Hasła do programowania rozbiły jednostki PMCI

    • Hasła do programowania rozbiły jednostki PMCI2

    • Hasła do programowania wykorzystowały awarię urządzeń UPEC

    • Hasła do programowania nowych jednostek UPEC

    • Hasła do programowania nowej prędkości wersji (V-MAX, ogranicznik prędkości)

    • Funkcja włączania / wyłączania trybu EOL (koniec linii)

    • Hasła dostępu do poziomu usług w oprogramowaniu DAVIE w celu uzyskania większej liczby uprawnień i funkcji
    price 80 $
    info priv

    0 0

    Hello fellars 

    Can anyone of you send me the original file of 

    Bosch EDC16
    03G906021AB
    Software 392913


    Many Thanks in advance

    0 0

    Hello

    Which diagnostic tool to choose for diag, test modul, programming.
    -Autel system ?
    -Ap200 autel ?
    -Launch system?
    -EasyDiag with obd hardware golo care..?

    There is a lot of model of each brand but is there really a big difference. I'd like your opinion.

    Thanks

    Envoyé de mon ELE-L29 en utilisant Tapatalk

    0 0
  • 11/24/19--07:48: Need help Clone edc17c59
  • Hello friends. 

    I have a problem after cloning an Opel EDC17C59.

    He had no way to communicate with the engine unit by obd and the car did not start, checking the wiring the only fault could be the ECU, so replace it with the same one, same hardware bosch.

    I have read a complete dump with Flex and recorded it directly in the donor ecu, the OTP zone has not been touched.

    The car wants to start but does not manage the rail pressure and reaches 2500bar and turns off as is logical. I thought it was a failure of the donor ecu so I tried another one, the result being the same.

    Can the error be caused by not touching the OTP zone? a bad cloned?

    Now I have P0088 error.

    I replace rail sensor, rail pressure regulator and wiring.

    .rar

    edc17c59_original.rar

    0
    756.13 KB

    .rar

    edc17c59_donor.rar

    0
    758.27 KB

    0 0

    [Image: gmaha0c5qqoa_t.jpg]
    [Image: jelo2kn28taj_t.jpg]
    • Funkcje narzędzi programistycznych DAF / PACCAR DAVIE:
      Hasła programowe rozbiły jednostki ASF

      Hasła programowe złamały jednostki DMCI

      Hasła programowania używają nieprawidłowego działania urządzenia ECSDC3

      Hasła do programowania używają awarii urządzenia ECSDC4

      Hasła do programowania używają błędu ECSDC5

      Hasła programowe złamały jednostki PMCI

      Hasła programowe złamały jednostki PMCI2

      Hasła programistyczne zawiodły w urządzeniach UPEC

      Hasła do programowania nowych jednostek UPEC

      Hasła do programowania nowej wersji prędkości (V-MAX, ogranicznik prędkości)

      Funkcja włączania / wyłączania trybu EOL (koniec linii)

      Hasła dostępu do poziomu usług w oprogramowaniu DAVIE, aby uzyskać więcej uprawnień i funkcji
    cena 80 $
    info priv

    0 0

    ZF Transmisión Repair Manual ZF ERGOPOWER


    (12 minutes ago)The_MechanicTlx Wrote: ZF Transmisión Repair Manual ZF ERGOPOWER

    .txt

    zf.txt

    1
    70 bytes

    0 0
  • 11/24/19--08:10: audi A3 09g transmission
  • hi guys, 2004 audi A3 29L fsi automatic just had the transmission repaired and technician said this type transmission is very troublesome especially the Valve Body. Car was running fine but now keeps going into limp mode and DTC is P0840 transmission fluid pressure sensor 1 malfunction. I was told the newer models do not come with pressure sensors due to the problems it used to have. if i come to a stop and cancel the dtc, the car changes gears again until after a while it goes back into limp mode. So the big question, can this dtc be removed from the tcm as the newer 09g does not have these sensors. oil level is fine and its seems to be an electrical problem because i can clear the dtc and drive again for a short while until limp mode again. any suggestion guys even from tuners please

    0 0

    [Image: gmaha0c5qqoa_t.jpg]
    [Image: jelo2kn28taj_t.jpg]
    • Funkcje Narzędzi programistycznych DAF / PACCAR DAVIE:
      Hasła programowe rozbiły Jednostki ASF

      Hasła programowe złamały Jednostki DMCI

      Hasła programowania używają nieprawidłowego działania Urządzenia ECSDC3

      Hasła zrobić programowania używają awarii Urządzenia ECSDC4

      Hasła zrobić programowania używają błędu ECSDC5

      Hasła programowe złamały Jednostki PMCI

      Hasła programowe złamały Jednostki PMCI2

      Hasła programistyczne zawiasy w obsłudze UPEC

      Hasła do programowania nowych jednostek UPEC

      Hasła do programowania nowej wersji prędkości (V-MAX, ogranicznik prędkości)

      Funkcja włączania / wyłączania trybu EOL (koniec linii)

      Hasła dostępu do poziomu usług w oprogramowaniu DAVIE, aby uzyskać więcej uprawnień i funkcji
    cena 80 $paypal
    info priv

    0 0
  • 11/24/19--08:31: Wv golf radio Code please
  • Hello i need radio Code for a vw golf here is chasis number Wvwzzz1jz3w514727, MCD.

    Thank you!

    0 0

    Hello, mates. One stupid question,- is special code requaired during reprogram procedure from CD and how to get this code?? First time will try reprog. 

    Best regards.

    0 0
  • 11/24/19--08:45: Simtec 71.6 info/help needed
  • Hello People,

    I have a problem with a Simtec 71.6 from Opel. When the car is running on idle it is running on all 4 cylinders but when i rev the engine a little bit cylinder 2 and 3 are having misfires and fault codes P0302 and P0303 are saved in the ECU. Checked the injector signals and i see that the ecu doesn't switch the injectors to ground, so probaly a faulty ECU.

    I have opened the ECU but i saw that some IGBT mosfets are behind the connector(See pictures), i tried to remove the connector from the PCB but i found out that they are not so easy to remove..

    So my question is: How can i remove these connectors from the PCB? Do i also have to remove the backside of the ECU housing from the PCB?(See picture).
    If so, how can i remove that backplate? Already tried to heat it but i'm not able to get any movement in that plate without damaging the PCB.. 

    Already thanks for your help! Smile 

    Cheers  653

    .jpg

    ECU1.jpg

    1
    293.94 KB

    .jpg

    ECU3.jpg

    0
    297.7 KB

    0 0
  • 11/24/19--08:50: GOLF MK6 ABS CODING QUESTION
  • Hi to all friends

    How are you and your loving people?

    I have a question
    Which are all steps one by one how to code abs in golf mk6 using vcds?

    Where can I get these codes from?

    Pls if any one can show me a link ir smth like that how to decode these abs i will be very gratefull

    Thank you

    0 0
  • 11/24/19--09:09: Xtool x100 pad 1
  • Hi

    I have Xtool pad 1 with last update in 2016. I just can't find a way to update to newest software as i dont have original paperwork that came with it. Is there someone that can help?

    0 0

    Hi guys,

    If anyone could help out with this radio code (for my own car), it would be appreciated.  It's an 8.4 Radio from a 2013 C300

    P/N:  P05091038AI
    ESN: 047028906375
    Date Code:  0582
    Supplier: 45301
    S/N:  T M9 058 2 00027

    Thanks and rep to come!

    0 0
  • 11/24/19--09:22: Med 17.5.25 Immo off
  • Hello,

    i have sourced an 1.2 tsi engine from Altea with Simos 10.10 ecu for my project.
    As far as i know, immo off on this ecu is not possible. Now i have an option to buy Med17.5.25 04E 907 309 AF with wiring.
    Before i do this, is possible to disable immo on this ecu?

    Thank you!

    0 0

    IVECO Eltrac ECi - Good truck diagnostics device with European Union quality

    Iveco Eltrac auto scanner is used for diagnostics, repair, and maintenance of all freight and commercial Iveco. Performs all types of work-related to computer diagnostics, service, programming electronic control units, troubleshooting, individual setting and changing service and technical parameters.

    Functionality:

    • Read and Clear DTCs
    • Reset Service Intervals
    • Testing and adaptation of actuators
    • Identification of systems (electronic control units)
    • Output to the computer screen of streaming data from ECU sensors
    • Electrical circuits.
    Equipment:
    • Iveco Eltrac adapter
    • OBD cable
    • USB cable for connecting Iveco Eltrac to PC
    • 30 pin cable.
    Options optional:
    • 38 pin cable
    • 19 pin cable
    • Bluetooth module.
    Works with diagnostic programs:
    • Iveco E.A.SY v13.0 and later (multilingual program (support for more than 20 languages)).
    Price $1720 (shipping included)
    [Image: IVECO-Eltrac-ECi.jpg][Image: IVECO-Eltrac-ECi-.jpg]

    Need it? Write to me to discuss the details.

    0 0

    Service manual for Toyota Corolla Fielder & Axio  

    (2006-2012)  Russian Only

    Engines:

    1NZ-FE 1.5 Lts.

    ZR-FE y 2ZR-FAE 1.8 Lts.


    After thanks and +rep I give you link for download!

    0 0

    Notes:

    First off, I'm not a qualified software or hardware developer of any sort.

    The hardware between the Genesis and the G80 is almost identical. The Intel Atom processor might be a revision newer in the G80.

    The G80 head unit functions normally in the Genesis...well, except it doesn’t use the same CAN commands to wake up the Lexicon amp. So no sound. All other hardware works fine. The OS from the G80 will boot and run in the 2015 head unit, minus the Carplay functions and some USB issues.

    The software present seems identical (with the exception of Projection for Android and CarPlay for MeeGo). Both units run MeeGo of the same revision. Just some different internal structure to control the newer Lexicon amp.

    With the source code and some programming knowledge, it may be possible to bring new functions to these cars and other MeeGo-based Hyundai/Genesis vehicles too. If you are or know a developer who is interested, feel free to share. It seems like most of this is done in C++. The source for the update and engineering functions is included Big Grin

    2015 OS (6GB zip, 120GB disk image): https://xtremission.s3-us-west-2.amazona...enesis.zip
    2018 OS (6GB zip, 120GB disk image): https://xtremission.s3-us-west-2.amazona...enesis.zip
    2015 App Source Code, with Carplay source from 2018 (7MB, files): https://xtremission.s3-us-west-2.amazona...e+Code.zip


    Some things from digging: The newer head unit has a slightly different firmware with a module called "iAP2", designed by LGE and I'm guessing how they're pulling off Carplay. I've compared the system configs and firmware mappings and very little is altered on the newer unit.

    I've got more detailed updates here

    0 0

    Looking at programming vag cars, component protection,key programming etc. What is best tool .I no audi vas online.but is there another tool. Will autel do online programming

    0 0

    I 'm looking to get help tuning my E320 CDI. 
    2005 OM648 with additional MODS:

    Huge hybrid turbo, capable of 2.5 bar
    built injectors flowing 25-30% more fuel according to test chart
    Bosch Cp3 400CDI fuel pump
    4bar MAP sensor,
    Huge intercooler
    CAT delete, straight downpipe, straight piped exhaust all the way
    EGR block off (its also switched off in software), resonator delete  turbo piping etc.
    Transmission and TC has ben build to withstand the torque.

    I've tuned it myself and I'm running 90mm3 of fuel right now with stock MAP sensor, but I'm looking for professional help now. 
    I know it's capable of more than that, but I don't feel comfortable doing it myself. i'm going to the dyno next week, to my friends shop (unlimited time) and i would like to have it done properly.
    I'm looking to get 2 maybe 3 versions of tune. Daily driver safe power ( i know it can be more than 90mm fuel). And 2 versions for for dyno day, just to see how much power this setup will bring. Smoke is allowed Smile

    PM or answer thread and i will send more files if needed

    attached is stock file

    .rar

    Black CDI.rar

    0
    1 MB

older | 1 | .... | 4839 | 4840 | (Page 4841) | 4842 | 4843 | .... | 5081 | newer