Quantcast
Are you the publisher? Claim or contact us about this channel


Embed this content in your HTML

Search

Report adult content:

click to rate:

Account: (login)

More Channels


Showcase


Channel Catalog



Channel Description:

MHH AUTO - https://mhhauto.com

older | 1 | .... | 824 | 825 | (Page 826) | 827 | 828 | .... | 4917 | newer

    0 0
  • 03/09/16--13:35: Siemens Sirius 81 Problem
  • Hello everyone!!! I have a verry serious problem with a 2003 Citroen C5 2.0 HPI with sirius 81 ECU. The car is a non starter and has P1631 Powertrain Control Module Internal fault, that won't clear. This happened after a diangosis with Autocom/Delphi, I don't know if it has something to do with it or it's just a coincidence. Any help is highly appreciated. Regards!!!

    0 0

    Can you guys help me to figure out the solution of these problems, this the vcds faults reading of the Cent Electric, what causes all these problems at once?

    Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
    Part No SW: 5K0 937 087 M HW: 5K0 937 087 M
    Component: BCM PQ35 H 011 0046
    Revision: BE011001
    Coding: 48180A3B8065F3C060080080B400092443553088776D85F05C800000A040
    Shop #: WSC 79863 123 100008
    VCID: 3F8B33BEAE0AD6E6A27-806A

    Subsystem 1 - Part No SW: 5N1 955 119 HW: Labels: 1KX-955-119.CLB
    Component: Wischer 29031 013 0203
    Coding: 009795

    Subsystem 2 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
    Component: RLS 310311 05 54 0403
    Coding: 03304D

    Subsystem 3 - Part No: 1K8 951 171
    Component: DWA-Sensor 00 001 0104
    Coding: 000000

    Subsystem 4 - Part No: 1K8 951 605 B
    Component: LIN BACKUP HO H11 9005
    Coding: 000000

    13 Faults Found:
    00907 - Intervention load Management
    000 - -
    Freeze Frame:
    Fault Status: 01100000
    Fault Priority: 6
    Fault Frequency: 4
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:52:31

    Freeze Frame:
    Term 15 On
    Voltage: 11.85 V
    ON
    ON
    OFF
    OFF
    OFF

    00978 - Lamp for Low Beam; Left (M29)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 1
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:52:45

    Freeze Frame:
    Term 15 On
    Voltage: 11.80 V
    ON
    ON
    OFF
    OFF
    OFF

    00979 - Lamp for Low Beam; Right (M31)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 1
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:52:45

    Freeze Frame:
    Term 15 On
    Voltage: 11.80 V
    ON
    ON
    OFF
    OFF
    OFF

    00984 - Left Tail Light (M4)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:52:07

    Freeze Frame:
    Term 15 On
    Voltage: 11.70 V
    ON
    ON
    OFF
    OFF
    OFF

    00985 - Right Tail Light (M2)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:52:07

    Freeze Frame:
    Term 15 On
    Voltage: 11.70 V
    ON
    ON
    OFF
    OFF
    OFF

    01496 - Bulb for Fog-Lamps; Left (L22)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 4
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:59:41

    Freeze Frame:
    Term 15 On
    Voltage: 11.85 V
    ON
    ON
    OFF
    OFF
    OFF

    01500 - Bulb for Fog-Lamps; Right (L23)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 4
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:59:41

    Freeze Frame:
    Term 15 On
    Voltage: 11.85 V
    ON
    ON
    OFF
    OFF
    OFF

    01502 - Bulb for Rear Fog; Left (L46)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:59:41

    Freeze Frame:
    Term 15 On
    Voltage: 11.85 V
    ON
    ON
    OFF
    OFF
    OFF

    01518 - Bulb for Back-Up Lights; Left (M16)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:59:41

    Freeze Frame:
    Term 15 On
    Voltage: 11.85 V
    ON
    ON
    OFF
    OFF
    OFF

    01519 - Bulb for Back-Up Lights; Right (M17)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:59:41

    Freeze Frame:
    Term 15 On
    Voltage: 11.85 V
    ON
    ON
    OFF
    OFF
    OFF

    02394 - Parking Light Left Front (M1)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:52:08

    Freeze Frame:
    Term 15 On
    Voltage: 12.15 V
    ON
    ON
    OFF
    OFF
    OFF

    02198 - Bulb for Tail Light 2; Left (M49)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:51:34

    Freeze Frame:
    Term 15 On
    Voltage: 11.80 V
    ON
    ON
    OFF
    OFF
    OFF

    02199 - Bulb for Tail Light 2; Right (M50)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 40
    Mileage: 173977 km
    Time Indication: 0
    Date: 2033.14.20
    Time: 02:51:34

    Freeze Frame:
    Term 15 On
    Voltage: 11.80 V
    ON
    ON
    OFF
    OFF
    OFF

    0 0

    Hello everyone, Can someone help me with this s problems, I see that my case is not the first. I worked fap off over volts and ecu safe but the problem is not solved but I was wondering whether anyone can to solve this?

    0 0
  • 03/09/16--13:56: T5 Multivan Problems
  • Hey together,

    i have a few problems with my T5 Multivan.

    i´ll beginn @ the start of all Problems.

    a few Month´s ago the clutch was defekt. So i changed it with the dual mass flywheel. At the same time the Motor had Problems while starting. I had to try it 2 till 3 times until the motor starts.

    3 months after changing the Parts the big tousle began....
    While i was driving the Motor runs high, white smoke everywhere and then the motor turns off.

    So i looked the separate Parts of the motor.

    <i found the exhaust manifold was broken, this was why the big smoking on the motor. I welded everything and it looks really good. I replaced everything back in.

    Now the smoking at the motor is gone, but when the Temperature goes up to 90 degrees the bus is smoking huge clouds, makes some crazy noises and got off.

    The crazy noises where the magnetic switch from the starter. Looked like i killed him while the much starting at the last months. Okay so changed the starter and the new one is working really fine.

    The Problem is still there. When the temp reaches 90degrees the Bus is smoking, the RPM is going up and the Motor stops. No noises or anything else. The smoke is not so big as before but still there.

    I changed the ECU for testing because i had the idea, maybe it´s the ECU but the same Problem with 3 parts. 1 original, 1 refreshed and 1 brand new from VW.

    There are no errors in the System.

    I´m at the End with my knowings, maybe someone can help me with my Bus?

    regards

    0 0
  • 03/09/16--14:00: help dtc 17563 polo tdi 1.4
  • hello,
    i have a problem with my polo tdi 1.4,
    car run but safe mode
    in vcds i have 3 fault

    17911/P1503 - Load signal from Alternator Term. DF: Range/Performance / Implausible Signal

    17563/P1155 - Manifold Abs.Pressure Sensor (G71): Circ. Short to B+

    17565 /P1157- Manifold Pressure Sensor (G71): Supply Voltage

    I change g71 and MAF with a new parts
    but no result
    i check connector and wires between ecu and g71 all is ok

    any idea ???

    turbo and all circuit pressure is ok :!

    thks in adavnce

    Sans titre.JPG
    File Type: .jpg
    Downloaded: 8 times
    Size: 146.1 KB


    0 0
  • 03/09/16--14:16: ESS Software DPF SOLUTION
  • Hi, I am still a newbie on here as its not been long enough since I joined in but I was wondering if the software named as ESS really works for DPF OFF , EGR OFF, DTC OFF ETC... as i am looking to invest into it.

    0 0

    Hello,

    i have one customer has problem with ecu.
    Someone tried to tine and on 100% galetto stops.

    now he get error CIM error.

    Car not start i think immo make problems.

    I had 2 years ago same expierience. I bought new ecu and adapt it with op com.

    Customer dont want buy new ecu he ask me to reset ecu.

    Is this possible when i read date someone can reset ecu for me?

    thanks!

    0 0

    Hi all.
    I've bought this van Kangoo 1.5 dci 85BHP year 2011 and the speed is restricted to 62Mph. This issue is not only annoying but dangerous as I drive on M25 motorway and is impossible to overtake vehicles. I have used Kess V2 and K-Suite to download the ori file and I've spend some money with ECU tuners trying to modify the file but all of them failure. I am not sure if I can edit and change the speed limiter or remove it using Renault Clip Tool. Or if there is a speed limiter device governor installed on the clocks...
    Anyone with the solution for this would be very helpful.

    Thank you.

    Regards,

    Ed.

    0 0
  • 03/09/16--14:43: need pin code RCD 310
  • need pin code RCD 310

    New Folder.rar
    File Type: .rar
    Downloaded: 5 times
    Size: 483.55 KB


    0 0

    GOLF IV 1.9 TDI ALH - 2001
    EDC15VM+

    038906012M

    Please check immo on/off. I attached two files.
    On instrument cluster adaptation i see -
    Ecu permitted - YES
    Ecu respond - NO

    The relay 109 is ok !

    golf 4 vmplus.rar
    File Type: .rar
    Downloaded: 2 times
    Size: 550 bytes


    0 0
  • 03/09/16--15:13: Iveco aifo pump number
  • Hi,

    I have a 8031 number 160566.

    It should have a bosch VE pump with a gov set at 1500rpm inside the pump but pump is missing. This set has no MPU or external gov.

    I have a 3cyl bosch ve from a 8031 which was controlled from an external gov via MPU.

    Im told it possible to swap internal components to convert the pump to run @ 1500rpm.

    Anyone have parts diagram of the gov set up required or a part number of the pump fitted to engine 160566.
    Or any assistance would be great.

    Many Thanks

    0 0
  • 03/09/16--15:29: help removing dtc edc16c39
  • hello, could someone help me to delete swirl actuator dtc from this ecu?

    p2008
    p2014

    alfa 159
    edc16c39 1.9 jtdm150 hp

    thanks in advance

    Alfa 159 (Full ORI) - 380494).rar
    File Type: .rar
    Downloaded: 2 times
    Size: 408.68 KB


    0 0

    Hi please i have damage eprom when removing , need dump for dsc module
    Trw mini 2010

    dsc ehcu 3451 6794014 01
    eprom 95160

    or can use virgin 95160 eprom and recode module ?

    thanks

    0 0

    Hi guys

    Not worked with mazda pcm before, it's a flood damaged customer vehicle and we wondering if it's possible to find a second hand pcm and code it?

    Photo of unit labels attached.

    Many thanks in advance.

    2102016103812.jpg
    File Type: .jpg
    Downloaded: 7 times
    Size: 124.78 KB


    0 0
  • 03/09/16--16:01: Scania CDEV help
  • Hi does anyone have Scania Cdev software woring without the dongle and would you please share ??

    0 0

    I recently buyed an original 88890300 adapter with HW revision 106 and installed PTT 2.03. The installation went OK, I did not apply any updates, just left the 2.03.00 and replaced the baldo dll and the exe. After I started TT and connected the adapter, it did a fw update to 1.27. Both leds the PC led and the Engine led are lit but there is no comunication with the truck (I mean it still writes no communication with product).
    My configuration is a dell latitude E6320, Win 7 x64 (clean install, only drivers and prereq. before the ptt install). Any suggestion or help with that?

    0 0

    Hello please can you make me a file egr off and dtc off P1408
    the car is jeep grand cherokee 3.0 crd 2008 edc16

    please confirm me for egr off

    ALS all at 1200,0
    RCO all at 0,00

    thanks you for all

    JEEP.rar
    File Type: .rar
    Downloaded: 5 times
    Size: 67.75 KB


    0 0
  • 03/10/16--13:28: Volvo fh4 nox torque
  • Does anyone know IF there is a way to remove nox torque reduktion ön the new Volvo euro6 trucks? IF so what tool would do the trick? The trucks reduce the speed to werry low levels with adblue fault..

    0 0
  • 03/10/16--13:36: Sale
  • Sale New
    Iveco 1400usd + Scania vci3 400usd
    For price scania vci 3 Only together with Iveco!!
    TACHOGRAPH PROGRAMMER CD400
    800usd
    Shipping only DHL
    warranty 1year.

    1.jpg
    File Type: .jpg
    Downloaded: 13 times
    Size: 274.43 KB


    0 0

    Helo my friends,can you help mi to off immo in this ecu bosch 0 281 001 726 in audi a4 1.9 tdi 1997 year,inside is eeprom 24c02.Thanks

    audi a4 1.9 tdi 1997 year bosch 0 281 001 726 eeprom 24c02(b58253)org.rar
    File Type: .rar
    Downloaded: 4 times
    Size: 330 bytes


older | 1 | .... | 824 | 825 | (Page 826) | 827 | 828 | .... | 4917 | newer