i need immo off for lucasDCU3R
Hey guys. I have a tricky one here. Eng ser# KAL09152.
The truck is a 2003 Sterling with a C7 cat engine. It came into the shop for a complaint that it would almost stall out and tonnes of black smoke would come out the exhaust. We couldn't get it to do it in the shop, but there was a code for loss of primary and secondary engine speed sensors. We replaced both sensors, test drove it, and it ran fine. While monitoring the fuel delivery, it would highlight in yellow for excessive delivery.
The driver picked it up, used it for a week, then phoned in saying it was doing it again. He sent me a video and the engine would almost stall out, then rev, over and over again. Black smoke was coming from the stack like a volcano. It's here again, and we can't make it do it again.
Also, he says he has to crank it for a long time to start it in the morning.
In the last year he has replaced primary fuel pump, high pressure pump, and one injector.
We have the valve cover off now to see if any injectors are leaking oil and they are not. IDEAS!!!!!???????
Hi, can somebody help me with the workshop manual for the komatsu bulldozer D65PX-12 Serial Number: 61163
Thanks in advance.
Looking for: Enigma /or/ Smelecom DataSmart+ Full
USED ONLY, pm price and full information
Need to know the pinout to this ecu, its from a Volvo C30 1.6.
Pinout for BDM or for FG Tech if its possible.
I offer full software for Linde CANBOX, CANBOX II, Doctor
Linde Service Guide
Remote installation on any computer
More info PM
freind has a 307 136hdi .ecu died ,so he got a replacement ecu with wrong hard ware sftware numbers , did a full bdm write of his old ecu into the new one , but theres no voltage to the injectors coming from the ecu
guessing thats the hardware difference
he's struggling to find an exact match to the ecu can find one with correct hd number , software number is different , but it should in thoery be fine with a full write of his on it therefore changing the software to the correct one .
only other differences are on the label of the ecu siemens sid 803
is one is labelled 5WS40029R-T where as his is N-T
any one know what difference this makes ?
he doesnt want to keep buying ecu's for it not to run and he cannot find an exact match .
hi to all
can any one help me to remove flaps and P1189 dtc from w203 270 edc15c6 flash
thanks in advance
I've recently installed in my 07 w221 s550 an used genuine AMG instrument cluster, but now it shows wrong speed for example my real speed is 80km/h but IC shows 110 km/h - I tried to code it using DAS but no succes - for example I changed in Variantcoding that I have IC 360AMG instead of default 260km/h but no help (of course after coding I restarted the IC ECU) no change
any ideas pleas?
Hi, I need advice what to buy for rading and writing MB W211 E200 CDI 2005
My budget is limited.
or SMPS MPPS V13.02 K+CAN
Also can I use any of mentioned interface as Diagnostic interface?
hello friends can help me .I have a Land Rover Freelander 2004 but need to change the ecu by a new one knows the procedure, thanks in advance
Hello i need
edc17cp14, 2013 VW 6-speed.
all files attached eprom-flash-epc.
hello every one
i have an old fiat examiner hp z5082b
and soft release 3.3 3.5 3.7 4.0 4.2 4.3
and it's boot floopy disks
and recovery cd rel 1.0
all this i cloned as image for helping others
and i fix problem cmos battery error
and touch screen by using mouse
but still have an problem
all thing working fine but no connection with ecu
it give me error message after trying to connect
in test page it give status of vci and dvom I letter
and same in version of vci but dvom not installed
i need some later release and how fix this problem
may be bios configuration was needed
thanks for any helping
and i can help as possible
Hey guys, can somebody help me please? I need the file 3996876.FLS for C9 Engine. Can you share it with me?
So the question here is if anyone has any ideia how to do this cars.
They have 2 ecus one ignicion and turbo and a jetronic that doesn´t have a eprom
Ignition and turbo
Any Ideias are wellcome. I will gladly pay for this service.
Thanks in advance,
Hello I have E65 and someone have programmed the full beam as day lights ?
Did someone know how to fix it ?
Thank you .
Hi all, I need 29f400bb and serial reading this ecu 95160 Citroen c3 with 7.4.4 with photo numbers from and appreciate.
0281012707 1037387658 thanks
i need help to solve one problem that i have on one ford fiesta 2009 1.4tdci i just check code error´s and they show me p1607 and u0100, the sintoms is wen i turn the key on some times he start´s some times won´t, wen he start runs without problems